CREE C2M0080120D - Revision history

Lorenzo ceccarelli at 15:17, 22 November 2016

2016-11-22T15:17:51Z

Lorenzo ceccarelli at 15:17, 22 November 2016

2016-11-22T15:17:17Z

Lorenzo ceccarelli at 15:14, 22 November 2016

2016-11-22T15:14:16Z

Lorenzo ceccarelli at 15:11, 22 November 2016

2016-11-22T15:11:15Z

Lorenzo ceccarelli at 15:05, 22 November 2016

2016-11-22T15:05:39Z

Lorenzo ceccarelli at 15:01, 22 November 2016

2016-11-22T15:01:49Z

Lorenzo ceccarelli at 14:58, 22 November 2016

2016-11-22T14:58:20Z

Lorenzo ceccarelli: Created page with "== Download == {{#dlmodel: C2M0080120D | http://www.igbtmodel.org/images/e/e6/C2M0080120D.zip }} == Identification tool == The parameter extraction has been done by means of ..."

2016-11-22T14:21:00Z

Created page with "== Download == {{#dlmodel: C2M0080120D | http://www.igbtmodel.org/images/e/e6/C2M0080120D.zip }} == Identification tool == The parameter extraction has been done by means of ..."

New page

== Download ==
{{#dlmodel: C2M0080120D | http://www.igbtmodel.org/images/e/e6/C2M0080120D.zip }}

== Identification tool ==
The parameter extraction has been done by means of a Matlab-PSpice parameter identification tool for SiC MOSFETs called MOSPEX which you can find [[MOSPEX|here]]. It is a user-friendly Graphic User Interface (GUI) that you can use on your own.
== Tests performed ==

=== Static ===

Fig. 1 reports the comparison between the datasheet information and the simulated static output characteristics. More precisely, Fig. 1 (a) shows the IGBT output characteristics at 150ºC for the following gate voltages: VGE=8V, 10V, 12V and 15V. Fig. 1 (b) displays the simulated static output characteristics as a function of temperature (i.e., T= 25ºC and T=150ºC) for a given gate voltage (VGE =15V).

{| style="margin: 0 auto;"
|-
| [[File:IGBT FF1000R17IE4 static.PNG|link=|thumb|600px|Fig. 1. Static response.]]
|-
|}
=== Dynamic ===

Fig. 2 (a) shows the comparison between measured and simulated turn-off waveforms at the following testing conditions: IC=560 A, VDC=900V and T=25C. The comparison between the PSpice simulation and experimental results validating the temperature-dependent IGBT model under inductive switching conditions are shown in Figs. 2(b) and 2(c) at 75ºC and 125ºC, respectively. Fig. 2 (d) shows the comparison between the experimental curves at different current and voltage levels (IC=670 A, VDC=1100V).

{| style="margin: 0 auto;"
|-
| [[File:IGBT FF1000R17IE4 dynamic.PNG|link=|thumb|600px|Fig. 2. Dynamic response.]]
|-
|}

|}

@@ Line 1: / Line 1: @@
 == Download ==
-{{#dlmodel: C2M0080120D | C2M0080120D.zip }}
+{{#dlmodel: C2M0080120D | http://www.igbtmodel.org/index.php?title=File:C2M0080120D.zip }}
 == Identification tool ==

@@ Line 35: / Line 35: @@
 === Dynamic ===
-Fig. 5 and Fig. 6 show the comparison between measured and simulated turn-on and turn-off waveforms for drain current and voltage at the following testing conditions: Id=30 A, Vds=600V and T=125C. A Double-Pulse test circuit has been used for the measurements, and some parasitic elements have been included in the simulation to emulate the real oscillation of the experimental waveforms.
+Fig. 5 and Fig. 6 show the comparison between measured and simulated turn-on and turn-off waveforms for drain current and voltage at the following testing conditions: Id=30 A, Vdc=600V and T=125C. A Double-Pulse test circuit has been used for the measurements, and some parasitic elements have been included in the simulation to emulate the real oscillation of the experimental waveforms.
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D current validation.png |link=|thumb|600px|Fig. 5. Validation of the drain current switching waveform.]]
+| [[File:C2M0080120D current validation.png |link=|thumb|400px|Fig. 5. Validation of the drain current switching waveform.]]
 |-
 |}
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D voltage validation.png |link=|thumb|600px|Fig. 6. Validation of the drain voltage switching waveform.]]
+| [[File:C2M0080120D voltage validation.png |link=|thumb|400px|Fig. 6. Validation of the drain voltage switching waveform.]]
 |-
 |}

@@ Line 12: / Line 12: @@
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D ID VGS.png|link=|thumb|400px|Fig. 1. DC Transfer Characteristics.]]
+| [[File:C2M0080120D ID VGS.png|link=|thumb|400px|Fig. 1. DC Transfer Characteristics validation.]]
 |-
 |}
@@ Line 18: / Line 18: @@
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D ID VDS.png|link=|thumb|400px|Fig. 2. DC Output Characteristics.]]
+| [[File:C2M0080120D ID VDS.png|link=|thumb|400px|Fig. 2. DC Transfer Characteristics validation.]]
 |-
 |}
-Fig. 3 reports the comparison between the experimental capacitance measurements for a drain bias sweep (Vgs=0) and the simulated curves.
+Fig. 4 reports the comparison between the experimental capacitance measurements for a drain bias sweep (Vgs=0) and the simulated curves.
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D cap.png|link=|thumb|400px|Fig. 2. DC Output Characteristics.]]
+| [[File:C2M0080120D cap.png|link=|thumb|400px|Fig. 3. Capacitance measurements validation.]]
 |-
 |}
-Fig. 3 reports the comparison between the measured conduction power losses and the simulated ones for increasing drain current and different junction temperatures.
+Fig. 4 reports the comparison between the measured conduction power losses and the simulated ones for increasing drain current and different junction temperatures.
 {| style="margin: 0 auto;"
 |-
-| [[File:C2M0080120D condloss.png|link=|thumb|400px|Fig. 2. DC Output Characteristics.]]
+| [[File:C2M0080120D condloss.png|link=|thumb|400px|Fig. 4. Conduction power losses validation.]]
 |-
 |}
 === Dynamic ===
-Fig. 2 (a) shows the comparison between measured and simulated turn-off waveforms at the following testing conditions: IC=560 A, VDC=900V and T=25C. The comparison between the PSpice simulation and experimental results validating the temperature-dependent IGBT model under inductive switching conditions are shown in Figs. 2(b) and 2(c) at 75ºC and 125ºC, respectively. Fig. 2 (d) shows the comparison between the experimental curves at different current and voltage levels (IC=670 A, VDC=1100V).
+Fig. 5 and Fig. 6 show the comparison between measured and simulated turn-on and turn-off waveforms for drain current and voltage at the following testing conditions: Id=30 A, Vds=600V and T=125C. A Double-Pulse test circuit has been used for the measurements, and some parasitic elements have been included in the simulation to emulate the real oscillation of the experimental waveforms.
 {| style="margin: 0 auto;"
 |-
-| [[File:IGBT FF1000R17IE4 dynamic.PNG|link=|thumb|600px|Fig. 2. Dynamic response.]]
+| [[File:C2M0080120D current validation.png |link=|thumb|600px|Fig. 5. Validation of the drain current switching waveform.]]
 |-
 |}

@@ Line 8: / Line 8: @@
 === Static ===
-Fig. 1 reports the comparison between the experimental DC Transfer curves and the simulated static output characteristics at different junction temperature values. It can be observed as the current capabilty of the MOSFET increases for higher temperatures when the gate voltage is low (NTC: negative temperature coefficient), while it decreases when Vgs is high (PTC: positive temperature coefficient). Fig. 2 reports the comparison between the experimental DC Output curves and the simulated static characteristics at different junction temperature values.
+Fig. 1 reports the comparison between the experimental DC Transfer curves and the simulated static output characteristics at different junction temperature values. It can be observed as the current capabilty of the MOSFET increases for higher temperatures when the gate voltage is low (NTC: negative temperature coefficient), while it decreases when Vgs is high (PTC: positive temperature coefficient).
 {| style="margin: 0 auto;"
@@ Line 15: / Line 15: @@
 |-
 |}
 {| style="margin: 0 auto;"
 |-
 | [[File:C2M0080120D ID VDS.png|link=|thumb|400px|Fig. 2. DC Output Characteristics.]]
 |-
 |}